Repairs To Upvc Windows Isn't As Difficult As You Think
Repairs To Upvc Windows Isn't As Difficult As You Think
Blog Article
Repairs to uPVC Windows
uPVC windows are an excellent option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they don't corrosion or rot.
Cleaning and lubricating regularly UPVC windows and doors is vital. This will help avoid unnecessary repair costs and improve energy efficiency.
1. Broken Glass
If the glass in your window is broken it could cause a large deal of damage to your home, making it extremely dangerous and possibly fatal. It is essential to take the time to ensure that you're doing everything you can to ensure that your windows are in good condition.
For single pane windows it can be relatively simple to replace windows, and the new one will usually fit inside the frame that was previously installed easily. However when you have double-pane windows that are held in place by internal beading, it will be more difficult to take out the old panes and put in new ones. In this instance, you will need to locate some plastic spacers that assist the new pane to fit properly into the frame of the window.
Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass by yourself. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric and not on the floor which could cause them to be trampled.
It's a good idea to cover the gap with tape after the glass is removed. This will prevent drafts and water from getting into your home until a professional is able to fix the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap between the door and the window is large, you might want to use a security screen that also includes windows. This will give you the best of both.
2. Sagging
uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. Over time, they can develop a number of problems such as sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from worsening.
To fix a window that is sagging you can try to reposition the hinges. To do this, you'll need open the window to access the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and verify the fit. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in the right place.
If you can't reposition the hinges you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to lose their tightness. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window waterproof and draughtproof.
uPVC handles may also become loose. Often it is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to close the window and then perform an experiment fitting. The corners of the sash should align with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle, and then turn the mechanism back into its original position.
3. Water Leaks
If you're waking up to wet floors and damp walls each time it rains it's important to take action. Water leaks from windows are not just a cause for degradation of your home's structure but also hinder your efforts to control the temperature in your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or not present.
This is a simple fix that can be done by any DIYer who is competent. Depending on the severity of the problem the old caulking may require removal before a fresh layer can be applied. When it comes to uPVC repair, you must avoid 'over-caulking'. This will only make your window more difficult to clean and reduce its energy efficiency.
It is important to check that the drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.
Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This is a fungus that thrives in damp conditions and can quickly spread throughout the house.
If the leakage occurs between the double-glazed window, it is more likely the problem is related to the seal, not the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or loose and blow open with a breeze, it may be the hinges that are at the fault. Any competent DIYer can replace the hinges in a matter of minutes.
Like any mechanical part hinges are prone to wear out over time. It's very simple to replace a hinge on a window however it is simpler if you have someone to help you hold the frame.
Verify that the uPVC hinges open and close in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.
Faulty window hinges could be the result of incorrectly opening the window a certain way or due to inadequate installation at the factory. Sending us a picture through our website can often resolve the problem. We are more than happy to provide suggestions.
Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We suggest using the lubricant that doesn't contain solvents, such click here as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It also decreases the chance of windows sticking and prevent corrosion. This is recommended to be done at least every year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.
5. Draughts
Draughts in Upvc windows can be caused by a few different things. First, the hinges due to wear and tear can become misaligned, this causes gaps to develop where the sash joins the frame. These can be easily repaired by giving them a good clean, but if they are beyond repair it may be necessary to have them re-aligned or replaced. The second is the interlock, which is on the hinge side of the window and can also be misaligned, and again it's feasible to give them a clean but in some instances it could be necessary to have them replaced.
The second most frequent reason for draughts is window seals, these can become worn down or damaged over time, and will allow air to escape through these gaps. Replacement of these with high-quality weatherstripping will help to keep draughts at bay. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures, and reduce draughts.
Lastly, one of the most effective methods to reduce draughts is by using a draught excluder, these are typically made of fabric that are filled with some type of filler. They can be put on the top of your windowsill. They will help keep cold air out and keep your home warm and cosy!
Your windows made of upvc will continue to provide excellent insulation and security in your home by performing regular maintenance and repairs. It is important to remember that all windows eventually become worn out, and it is more cost-effective to replace them instead of fixing them. So, if you are experiencing problems with your upvc windows, it is recommended to seek assistance from a professional immediately.